How To Light Pilot Light On Gas Fireplace Insert. Push in knob (this releases the gas to the pilot area only). Push in the pilot knob, which manually sends gas into the system.
This process may take several minutes and several attempts. 25.reset the knob to the pilot position: Push in knob (this releases the gas to the pilot area only).
Table of Contents
When You Are In The Off (Full Clockwise) Position, Rotate Clockwise (Approximately 1/8 Turn) To The Position Of The Pilot And Then Push On The Control Knob Completely Into.
Make sure your main gas supply is on. The pilot, found as part of the ignition, can often be seen when looking down from above within the firebox or below through the control area. Push the igniter button once every second until it lights.
When The Pilot Light Is On Stop Press On The Ignition Switch.
Keep Trying Periodically To Light The Pilot Light.
From off position, turn gas control knob (reads off, on & pilot) counterclockwise to pilot position. Often, this will involve manually depressing the pilot valve and using an electric ignitor or match to light the pilot. 2.owners of traditional gas fireplaces don't have to worry about that, though, since the flame comes from a standing pilot.
Has The Pilot Light On Your Fireplace Gone Out?
Vermont castings pilot problem hearth com forums home. Continue pressing to turn the dial for thirty minutes. 13.this allows the gas to reach the pilot assembly.
While Pressing Down The Control Knob In The Pilot Position, Press The Ignition Switch.
Here’s how to light a gas fireplace with a control panel. Press and continue to press down on the control knob while ud press the ignition switch one time per second.press down on the knob that controls your propane fireplace.press the fireplace safety pilot control knob down and hold it as you turn it over to the pilot position. Fortunately, there are a few things you can do to adjust the pilot if necessary.