How To Measure Trailer Axle Alignment. Next measure from the straightedge to the frame in back of the wheel & compare the two measurements. If the distances deviate by more than 1/8 inch, then the rear axle is out of alignment with the front axle.
How to order an axle. They should be identical or within 1/8 of an inch, give or take 1/16 of an inch. Choose the same spot on each hub and measure diagonally.
Then Take The Same Measurement To The Other Wheel Center.
• properly position the trailer. Both dimensions should be the same. Camber refers to the measurement of a vehicle’s wheels vertical alignment with the ground.
They Should Be Identical Or Within 1/8 Of An Inch, Give Or Take 1/16 Of An Inch.
If the distances deviate by more than 1/8 inch, then the rear axle is out of alignment with the front axle. Steel tape measure with 1/ 32 inch increments. This is especially true for off road trailers, like atv trailers.
Next Measure From The Straightedge To The Frame In Back Of The Wheel & Compare The Two Measurements.
Measurement # 2 = spring center. • digital photos of suspension and damaged areas. You want an axle that is similar to the one currently under the trailer to avoid any problems with clearance.
Measure And Note The Distance Between The Front Wheel And Rear Wheel On Either Side Of The Trailer, If Your Trailer Has A Second Axle.
But the problem is aligning everything so your trailer will pull straight and true. They’re not complicated, but fitting the needs is a little more than picking. • check the initial axle alignment.
• Set The Designed Kingpin Height.
Next measure from the straightedge to the frame in back of the wheel and compare the two measurements. In this video, i show you how to accurately place and square trailer axles with detailed step by step instructions on how to locate and square your trailer a. 21.i’ll just drop by the parts store and grab an axle.